10
DS1072-028
11
DS1072-028
Dip switch position Main station number
Not
defined
(for programming with
external
keypad)
Station
1
Station
2
Station
3
The LED will light up
and a confirmation tone
will be heard
Set the main station number (1, 2 or 3)
by means of the dip switches (
*
)
on all door units
Hold the “Hall” button pressed
(PA; GND terminals) for the time
to be programmed
Press the programming button
on the door unit
Press the programming button
SIMPLIFIED PROGRAMMING
PROCEDURE
with dip-switch and led
Program door lock
activation time
(to be repeated
for all door units)
Assign station
number
The LED will go out
and a confirmation tone
will be heard
1 2
1 2
1 2
1 2
The door unit will acquire
the time and will beep
when the button
is released
The LED will light up
and a confirmation tone
will be heard
A confirmation beep
will be heard each time
the button is pressed
Go to the apartments in the booking
sequence, hold the door
opener button pressed and pick up
the door phone handset
Press all calling buttons for the door
phones to be programmed and note
the sequence down.
DO NOT PRESS
BUTTON P1 (staircase lights) (
**
)
Press the programming button
on any door unit
Wait for 30 seconds
Program apartment
stations
(to be repeated
on any door unit
and all apartment
stations)
The LED will start blinking
and a confirmation tone
will be heard
The apartment station
will beep twice and the LED
will blink to confirm
programming.
The door unit LED
will go out
after programming
Diagram A2
Programming procedure for systems with
up to 3 main calling stations
(no secondary stations) with stair
lights function on button P1.
(*)
All data will be lost if the dip switches are moved also after ending the programming procedure.
(**)
If you make a mistake, quit programming, hold the programming button pressed for longer than 3
seconds. The door unit default setting will appear.
