Urban Coop Company Round-Top Chicken Coop Walk-In, Руководство по сборке

Страница: 34 / 41

Step 3.7 Door Assembly
Round-Top Walk-In Coop
Copyright ® All Rights Reserved
Urban Coop Company
TM
Find your inner farmer
TM
Note:
We deliver the coop for a RH swing out
door. If you want the door to be LH or swing in it can be
field modified. Contact us if you need assistance.
Œ
Layout the 3 A1 Door Panels. Middle Panel is 1/4”
taller than tops and bottoms. By driving screws up
through bottom into top panel ( see ) and making
X’s
edges VERY flush, attach 3 panels together. Door is 27”
wide.

Attach 4 H11 3” Door Hinges onto A1 Door Assembly
in pre-drilled holes using provided #8 1 1/2” Phillips
Screws.
Ž
Position the A5 Door Handle onto opposite side of
Door hinges and position to where hole on side of
handle aligns with seam indicated by
Ü
and leave a 1
1/4 inch overhang of handle beyond edge of door frame.
See Fig
Ž
Attach A5 Handle to A1 Door by driving
Brown T25 screws into pre-drilled holes.

Using shims and/or pieces of cardboard from packing
position door in frame align hinge holes with pre-drilled
holes in door frame and using provided #8 1 1/2” Phillips
Screws attach door.

Field Install H5 Bolt Style Gate Latch into position
“
so that bolt freely goes into hole of A1 Door Handle,
moving bolt back and forth to position best. Mark holes
and install with provided bolts. Use H6 Clip to keep door
locked or unlocked.
Door
Round-Top Walkin Chicken Coop
Round-Top Chicken Coop
X
X
X
X
X
X
A1
A1
A1
Ü
±
±
±
±
±
±
±
Fig
Ž
“
1 1/4”
Hole In Edge
Of A1 Handle
A1 Handle
Ü