UPS Aviation Technologies AT7000, Руководство по установке

Страница: 64 / 76

Troubleshooting Installation Manual
Page 54 560-0405-00 Rev –
December 14, 2001
© 2001 by UPS Aviation Technologies Inc.
The antenna program selections are:
0) Dual antenna
1) Bottom only
9.2.5 Discrete Inputs
The Discrete Input group is used to display the status of the rear panel discrete inputs,
such as the altitude select and control panel select.
These displays are used to display the state of each of the discrete inputs, grouped in the
following pages.
Discrete Inputs Page 1:
The top line is used to display the control panel selected, either A or B.
The second line is used to display the current mode of the standby input, either “Standby”
or “Active”.
The third line is used to display the state of the functional test input, either “Test” or
“Norm”
Discrete Inputs Page 2:
The top line is used to display the altitude source selection, either 1 or 2.
Antenna Program:
Dual Antenna
DISCRETE INPUTS
Press
←→↑↓
TEST
Cntrl Panel: A
Mode: Standby
Func Test: Test
Alt Select: 1
Alt Compare: on
Sync #1: Valid
Sync #2: Invalid