UNTHA RS100-4-S, Руководство по эксплуатации

Страница: 33 / 56

/
/
/
5
5
5
²
²
²
/
/
/
5
5
5
32
Operating manual
RS100-4-S
BA-AB-4485-RS100-Englisch.doc Erstelldatum 30.05.2011 14:57:00
32
10. Maintenance
Regular maintenance is a prerequisite for correct and problem-free machine function. Damaged
parts must be replaced immediately to avoid damage caused by their continued use.
10.1 Safety guidelines
•
Before starting any maintenance work always turn off the main switch and padlock it to prevent
the possibility starting up again!
•
Only use original spare parts manufactured by Untha (see appendix)! Otherwise the guarantee
expires!
•
Only use authorised oils, cooling fluids, greases and coolants!
•
Dispose of old grease in line with environmental disposal guidelines!
•
Cleaning, greasing and maintenance work may only be carried out by authorised expert staff in
line with the regulations concerning installation and maintenance work and accident prevention
regulations!
•
Maintenance of electrical equipment may be executed by qualified and authorised electro
personnel only!
10.2 Maintenance overview
Min. Interval Type of maintenance Chapter
Daily Check if throughput is enough
Daily Check for external damage
Daily Check function of safety mechanisms 4.2
Daily Check function of protective structures 4.1 u. 10.3
Daily Check function and oil level of the spray unit 10.5
Daily Check gear oil level 10.4
Daily Check the exit screen at damages and material blockages 11.2
Weekly Cleaning of the bulkhead spaces 10.6
Weekly Check filling level of the lubricant tank 10.7
Biweekly Cleaning the exit screen 11.2
Monthly Function control central lubrication 10.7
Monthly Cleaning the complete machine
Monthly Check belt tension (1
st
check after 20 operating hours) 10.8
Monthly Check the fixing of the locking bolts of the exit screen 11.2
Monthly Check if cutting mechanism is fixed 11.3
Half-yearly Check all boltings and welded connections
Every 1000h
(at least
yearly)
Change gear oil gear system and spray unit (1
st
change after 500
operating hours)
10.4 and
10.5
Yearly Greasing of the drive motors 10.7.2