UNTHA RS100-4-S, Руководство по эксплуатации

Страница: 32 / 56

/
/
/
5
5
5
²
²
²
/
/
/
5
5
5
31
Operating manual
RS100-4-S
BA-AB-4485-RS100-Englisch.doc Erstelldatum 30.05.2011 14:57:00
31
Danger:
To avoid risk to life and limb from electric shocks, only qualified, authorised personnel are allowed
to work on the electrical equipment!
9.10 Help with breakdowns and problems
In case of breakdowns and operating problems, machine operators must inform their superiors.
Under no circumstances may the operator attempt to solve problems with the electrics/electronics
him/herself!
Problem Cause Solution
Machine can’t be
switched on
EMERGENCY OFF button pressed Pull out EMERGENCY OFF button
Main switch in „OFF“ position Main switch to „ON“
Foreign matter shut down active See chapter 9.6
Engines hums
One cable not carrying electrical
current Check fuses, protectors or motor
protector.
Rotor often changes
direction
Machine overworked due to
insufficient discharge of shredded
material
Remove shredded material
regularly.
Foreign material blockage of
cutting tools
See chapter 9.6
Cutting disks worn down See chapter 11.3
Throughput drops
Material blocking exit screen See chapter 11.2
Shredded material collecting and
pressing on exit screen Remove shredded material
regularly
Worn cutting mechanism See chapter 11.3
Unusual noises from the
cutting mechanism
Blockage caused by shredded
material
1. Switch off machine and padlock
to rule out switching on again.
2. Remove material from cutting
tools.
Unsuitable material
contacting/caught in cutting
mechanism
Rotation direction wrong Current connected up incorrectly See chapter 8.4
Thermal motor protection
has tripped (on drive
motor)
Machine overworked,
Motor overheating
Let the motor cool down, then turn
the turn-switch at the motor
protection in the control box to ON
(I).