85
Set whether to enable the arming schedule.
Select the
Enable Plan
check box and set the start time and end time of alarms (click
Edit
). The time ranges
cannot be overlapped. The device outputs alarm signals only within the preset valid time ranges.
The options of day include Monday to Sunday and the time of each day is defined using four time ranges.
After setting the plan time for one day, you can click Copy and then click Paste on another day to copy the
plan time to other days.
Drawing Arming Time by Using the Mouse
Editing Tables to Set Arming Time
(5)
Click
Save
.
3. Door magnet alarms
When the face recognition terminal connects to a door magnet, it can receive door magnet alarms.
(1)
Choose
Setup
>
Events
>
Events
and then click
Door Magnet Alarm
.
Figure7-56
Door Magnet Alarm Configuration Interface
(2)
Set basic information about door magnet alarms.
1)
Select alarm and set the alarm name.
2)
Select the alarm type. Set
Alarm Type
to
N.O.
or
N.C.
based on whether the connected alarm input
device is of the normally open or normally closed type. For example, for normally open alarm input
devices,
Alarm Type
must be set to
N.O.
so that the face recognition terminal normally receives alarms
from the connected device.
