43
The value ranges from 1min to 60min.
You can enter the value based on actual conditions.
Subsection Size (MB)
This parameter is displayed only when
Recording
is set to
Subsection by
Size
.
The value ranges from 10MB to 1024MB.
You can enter the value based on actual conditions.
When Storage Full
The options are as follows:
Overwrite Recording: When the assigned storage space on the
computer is used up, The device deletes the existing recording files to
make room for the new recording file.
Stop Recording: When the assigned storage space on the computer is
full, recording stops automatically.
Total Capacity(GB)
Total capacity assigned for local recording.
The value ranges from 10GB to 1024GB.
You can enter the value based on actual conditions.
Files Folder
Path for storing snapshot photos.
(3)
Click
Save
to complete the configuration.
3. Ethernet
Modify communication settings such as the IP address for the face recognition terminal so that the face
recognition terminal can communicate with other devices.
NOTE!
After you have changed the IP address, you need to use the new IP address to log in.
(1)
Choose
Setup
>
Common
>
Ethernet
to go to the
Ethernet
interface.
Figure7-13
Ethernet Configuration Interface
(2)
Set
Obtain IP Address
as shown in
1
in the figure above.
When
Obtain IP Address
is set to
Static
, complete the configuration by referring to the figure below.
