Universal Laser Systems ULTRA X6000, Руководство пользователя

Страница: 61 / 83

61
F
Gas Assist Type
Enables selection of the type of Gas Assist to be applied. Options include
Gas , Air, and None. If using Coaxial Gas Assist or the optional Lateral Gas
Assist , either the Gas or Air option must be selected.
If Gas or Air is selected for any process, all processes must have one or the
other selected. If no Gas Assist is desired, the Coaxial or Lateral Gas Assist
attachment must be removed, and no process can be set to use Gas or Air.
G
Gas Assist Flow
Rate
Enables the target flow rate adjustment for the Gas Assist source. This
option is not available when None is selected for Gas Assist.
H
Number of Drill
Pulses
Indicates the number of drill pulses to be dispensed.
I
Duty Cycle
The percent of time the laser remains on for each pierce pulse.
J
Repeat Count
The number of times to repeat the selected process.
K
Autofocus Toggle
Button
Enables or disables the Autofocus procedure before the selected process
begins. If a single material height is used, it is often more efficient to enable
Autofocus for the first process only, then disable subsequent processes.
L
Save / Delete /
Discard Changes
Buttons
Select one of these options to: Save the process settings, Delete
the current process and move the assigned colors to the un-
assigned category, or Discard any changes and return to the System
Operations Page .