Universal Laser Systems ULTRA X6000, Руководство пользователя

Страница: 13 / 83

13
Safety 2
DESCRIPTION OF APPROPRIATE USE
Designed for digital laser material processing (cutting, engraving, marking, surface modification), the
ULTRA X6000 Platform Series is suitable for use in an office, laboratory, workshop, or light-duty
manufacturing environment. Materials to be processed must fit entirely inside the system for proper
operation (Class 1 laser safety). If using the optional Class 4 Pass-Through module, refer to the Class
4 Pass-Through Laser Safety section of this user guide.
This device is not designed, tested, intended, or authorized for use in
any medical applications, surgical applications, medical device
manufacturing, or any similar procedure or process requiring approval,
testing, or certification by the United States Food and Drug
Administration (FDA) or other similar governmental entities.
General Safety
Use of the ULTRA X6000 Platform in a manner other than described in this manual or failure to follow
the operational instructions and safety guidelines listed in this manual can result in personal injury
and may cause damage to the operator, the equipment, and the surrounding property. Carefully
read and observe the important safety information set out in this safety section before
operating the equipment. If you have any safety questions, please email the ULS Support Team
at: support@ulsinc.com or call:
+1 480 609-0297 (USA)
+43 1 402 22 50 (Austria)
+81 45 224-2270 (Japan)
EXPOSURE TO THE LASER BEAM CAN RESULT IN BURNS TO THE SKIN AND
SEVERE EYE DAMAGE . Proper use and care of this system are essential to safe operation.
Use of controls, adjustments, or performance of procedures other than those specified herein
may result in exposure to hazardous laser radiation.
WHEN USING THE OPTIONAL CLASS 4 PASS-THROUGH MODULE, PROPER
EYEWEAR MUST BE USED AT ALL TIMES WHEN THE BEAM INDICATOR IS
ILLUMINATED ON CLASS 4 CONTROL PANEL. Eyewear must be properly certified for use
with and protection from all material processing laser wavelengths in use (10.6 µm, 9.3 µm,
and 1.06 µm, and at least an optical density 5+. If unsure of proper eyewear requirements, do
not operate the laser system with Class 4 Pass-Through installed, and consult your certified
Laser Safety Officer (LSO) or a ULS Service Team member for more information.
SOME MATERIALS CAN PRODUCE TOXIC AND CORROSIVE FUMES DURING LASER
PROCESSING. Obtain the Material Safety Data Sheet (MSDS) from the manufacturer for
every material to be processed in the laser system. The MSDS discloses all hazards when
handling or processing a particular material.