Universal Laser Systems ULTRA X6000, Руководство пользователя

Страница: 54 / 83

54
E
Laser Type
If the system has multiple laser sources available for the selected
material, this drop-down menu may be used to select the laser
type to be used for the selected process.
F
Power Adjustment
The Intelligent Materials Database determines the appropriate
laser power based on the material type, thickness, and selected
laser type. Power adjustment enables fine-tuning of this value to
accommodate deviations in material thickness or chemical
formulations.
G
Laser Enable / Disable
Toggle Buttons
Enables or disables individual lasers if more than one is available
for the selected laser type.
H
Gas Assist Type
Enables selection of the type of Gas Assist to be applied.
Options include Gas , Air, and None. If using Coaxial Gas Assist or
the optional Lateral Gas Assist , either the Gas or Air option must be
selected.
If
Gas or Air has been selected for any process, all processes must
have one or the other selected. If no Gas Assist is desired, the
Coaxial or Lateral Gas Assist attachment must be removed, and no
process can be set to use either Gas or Air.
I
Gas Assist Flow Rate
Enables target flow rate adjustment for the Gas Assist source. This
option is not available when None is selected for Gas Assist.
J
Repeat Count
The number of times to repeat the selected process.
K
Material Selection
Indicates the currently selected material for the current database
process. The Pencil button launches the database’s Material Selection
Dialog that categorically lists all materials in the Intelligent Materials
Database compatible with the current system setup.
L
Autofocus Settings
Enables or disables the Autofocus procedure before the selected
process begins. If a single material height is used, it is more
efficient to only enable Autofocus for the first process and leave
subsequent processes disabled.
In the case shown above, Autofocus is disabled, so the system is
instructed to Stay In Place at the beginning of the process.
M
Save / Delete / Discard
Changes Buttons
Select one of these three options to: Save the process settings,
Delete the current process and move the assigned colors to the
unassigned category, or Discard changes and return to the System
Operations Page .