Universal Laser Systems ULTRA X6000, Руководство пользователя

Страница: 58 / 83

58
F
Speed Setting
Displays the process speed setting percentage to be applied to all colors in
the process.
G
Gas Assist Type
Enables selection for the type of Gas Assist to be applied. Options include:
Gas , Air, and None. If using Coaxial Gas Assist or the optional Lateral Gas
Assist , either the Gas or Air option must be selected.
If Gas or Air has been selected for any process, all processes must have one
or the other selected. If no Gas Assist is desired, the Coaxial or Lateral Gas
Assist attachment must be removed, and no process can be set to use
either Gas or Air.
H
Gas Assist Flow
Rate
Enables target flow rate adjustment for the Gas Assist source. This option is
not available when None is selected for Gas Assist.
I
Repeat Count The number of times to repeat the selected process.
J
Autofocus
Toggle Button
Enables or disables use of the Autofocus procedure before the selected
process begins. If a single material height is used, it is often more efficient
to only enable Autofocus for the first process, then leave subsequent
processes disabled.
K
Save / Delete /
Discard Changes
Buttons
Select one of these options to: Save the process settings, Delete the current
process and move the assigned colors to the unassigned category, or
Discard changes and return to the System Operations Page .