25
1.
Press
and
(rewind and fast
forward) at the same time until the
power key blinks twice, then
9 9 5
.
The power key blinks twice.
2.
Press
Power
.
3.
Enter the series of commands you
want the macro to execute (up to 8
commands).
4.
Press
OK
to save the power macro.
Now, when you press and hold the
Power
key for about 1.5 seconds, the remote
will send the series of commands you
have entered. For example, you could
program the
Power
key to turn on both
your TV and cable box and select a
particular channel.
Clearing the Power Macro
1.
Press
and
(rewind and fast
forward) at the same time until the
power key blinks twice, then
9 9 5
.
The power key blinks twice.
2.
Press
Power
.
3.
Press
OK
to clear the power macro.
Now pressing and holding
Power
simply
turns the selected device on or off.
CLEARING CUSTOM
PROGRAMMING
The MediaRemote with SimpleCenter
contains a
Custom Programming Reset
option. You can use it to remove all
custom programming except your setup
codes.
IMPORTANT:
Executing this program will
erase all custom settings for
Volume Lock, Learned Keys,
Macros, and Channel Lock.
However, your device programming
remains.
NOTE:
If more than 10 seconds pass
between key presses, the remote
exits programming.
1.
Press
and
(rewind and fast
forward) at the same time until the
power key blinks twice.
2.
Enter
9 8 0
. The power key blinks
twice, pauses, and blinks twice
again to confirm that all custom
programming is cleared.
Media Remote Rev 1.fm Page 25 Monday, October 3, 2005 4:12 PM
