11
write down each working device
code in the boxes on the following
page.
TV
Key Code
Device Type:________________
CBL/SAT
Key Code
Device Type:________________
AUDIO
Key Code
Device Type:________________
PROGRAMMING PC CONTROL
MediaRemote with SimpleCenter allows
you to control your digital media and
access it on your PC or on your home
entertainment system, via the USB
receiver. The receiver connects to your
PC by a USB cable. For more information
on connecting the receiver, see the quick
start setup guide included in this
package.
You do not need to program a device
code into MediaRemote with
SimpleCenter to control the receiver.
However, it is possible that someone else
in your building or complex may also
have a MediaRemote with SimpleCenter,
so the remote contains 3 different
addresses for the receiver, which you can
cycle between to avoid conflicting signals.
NOTE:
If more than 10 seconds pass
between key presses, the remote
exits programming.
To change the receiver address:
1.
Press
PC
.
2.
Press
and
(rewind and fast
forward) at the same time until the
power key blinks twice.
3.
Press
41
,
42
, or
43
to change the
address.
NOTE:
If the power key displays a long
blink, the entry is invalid. Repeat
steps 1 through 3.
Media Remote Rev 1.fm Page 11 Monday, October 3, 2005 4:12 PM