Unitest Telaris 0100, Инструкция по эксплуатации

Страница: 33 / 108

English
Acoustic Signals
Confirmation Signal:
The confirmation signal is a short beep which is au-
dible once an important procedure is started (e.g.
start of measurement, data memorisation or delet-
ing)
Error Signal:
The error signal is a sequence of two short beep
sounds. It indicates either errors occurring during
the measurement or that the selected function may
not be carried out.
5.0 Carrying out Measurements
FAT (Final Approval Test) measurements have
to be carried out in compliance with the ap-
propriate applicable standards.
33
Carrying out Measurements
®
EN 61557 / EN 60364
IEE 16 Edition / DIN VDE 0100
19)
20)
21)
22)
23)
24)
25)
26)
27)
29)
30)
31)
32)
28)