4. Mode: press
the key to switch between cooling, fan, dehumidifying mode.
5. Up: press
the key to increase temperature and timing set value.
6. Fan: press
the key to select high, low wind speed.
7. Sleep Mode: Press
the key to turn on the sleep mode.
V. A Variety of Protection Functions
Frost Protection Function:
In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust pipe is too
low, the machine will automatically enter protection status; if the temperature of the exhaust pipe rises to
a certain temperature, it can automatically revert to normal operation.
Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm,
and the "FULL" indicator light will flash. At this point, you need to move the drainage pipe connecting the
machine or the water outlet to sewer or other drainage area to empty the water (details see
Drainage
Instruction
s at the end of this chapter). After the water is emptied, the machine will automatically return
to the original state.
Automatic Defrosting (cooling models have this function):
The machine has automatic defrosting function.
Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after
the compressor is turned off.
VI. Drainage Instructions
1. Manual drainage:
1) When the machine stops after the water is full, turn off the machine power and unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the water pan at the bottom of the
body.
2) Place the water container below the side water outlet behind the body.
3) Unscrew the drainage cover and unplug the water plug, the water will automatically flow into the water
container.
Notes:
1. Keep the drainage cover and the water plug properly.
2. During drainage, the body can be tilted slightly backwards.