I. Attention Matters
Warnings:
1. Do not use means to accelerate the defrosting process or to clean, other than those recommended by
the manufacturer.
2. The appliance shall be stored in a room without continuously operating ignition sources (for example:
open flames, an operating gas appliance or an operating electric heater.)
3. Do not pierce or burn.
4. Be aware that refrigerants may not contain an odour.
5. Appliance shall be installed, operated and stored in a room with a floor area larger than 7 m2
7. Keep any required ventilation openings clear of obstruction;
8. Servicing shall be performed only as recommended by the manufacturer.
9. The appliance shall be stored in a well-ventilated area where the room size corresponds to the room
area as specified for operation.
10. Any person who is involved with working on or breaking into a refrigerant circuit should hold a
current valid certificate from an industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an industry recognized assessment
specification.
11. Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance
and repair requiring the assistance of other skilled personnel shall be carried out under the supervision
of the person competent in the use of flammable refrigerants.
12. All working procedure that affects safety means shall only be carried by competent persons.
Notes:
The air conditioning is only suitable for indoor use, and is not suitable for other applications.
Follow local grid interconnection rules while installing the air conditioning and ensure that it is
properly grounded. If you have any question on electrical installation, follow the instructions of the
manufacturer, and if necessary, ask a professional electrician to install it.
Place the machine in a flat and dry place and keep a distance of above 50cm between the machine
and the surrounding objects or walls.
After the air conditioning is installed, ensure that the power plug is intact and firmly plugged into the
power outlet, and place the power cord orderly to prevent someone from being tripped or pulling
out the plug.
Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet
free from obstructions.
When drainage pipes are installed, ensure that the drainage pipes are properly connected, and are
not distorted or bended.
While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands gently to
avoid damaging wind-guide strips.
When moving the machine, make sure that it is in an upright position.
The machine should stay away from gasoline, flammable gas, stoves and other heat sources.
Don't disassemble, overhaul and modify the machine arbitrarily, otherwise it will cause a machine
