Unitech MS860G, Руководство пользователя

Страница: 63 / 81

MS860G WiFi Manual 59
PROGRAMMING VIA SCANNER INPUT
Data Editing, continued
* Asterisk - Wild-card character used to specify any digit or
position.
# Hash sign - Wild-card character used to specify any letter or
last position.
Finally, end the programming sequence with the “Enter” bar
code. Do not follow it with a comma. If you need to add another
formula, do so now by scanning the “IN_ID” bar code directly,
followed by the rest of the second formula’s parameters, and
then "Enter" again. Lastly, scan the “Exit” bar code.
Thus, if we want to output just the first five characters only from
UPC-A input and then follow it with three “0”s, the scanning
sequence should be as follows:
Enter Group 9 IN_ID , 3 , O-STR , 1 , 5 , “ 0 0 0 “ , Enter Exit
If we only want to treat UPC-A this way, but still want other
symbologies to output normally, the scanning sequence would
be as follows:
Enter Group 9 IN_ID , 3 , O-ST R , 1 , 5 , “ 0 0 0 “ , Enter
IN_ID , 19 , O-STR , 1 , # , Enter Exit