Unitech MS860G, Руководство пользователя

Страница: 19 / 81

MS860G WiFi Manual 15
WiFi NETWORK SETTINGS
(4) One may use the Default Server port & Server IP to
connect Server IP (TCP server)
Note:
1. The PC which run moniter.exe utility should detect the IP
address itself and the IP address should be act as TCP
server if Server IP is different from the monitor.exe detected
one may assign it by oneself.
2. One shouldn’t change the Server port & Server IP if one
want to use the PC which run moniter.exe utility to act as
TCP server.
3. If one’s PC wants to manage all SW1601T in the subnet,
one should assign different server port for each SW1601T,
one may use the default settings which monitor.exe utility
provide.
4. One may use “ Clear ” button to remove Virtual com port
settings, after remove the “ used ” state should be erased.
5. One may also click the toolbar below to access Virtual COM
(Serial/IP) control panel (Figure 8).
Figure 8 Access Virtual com (Serial/IP) control panel via toolbar
3. Change SW1601T’s network, Basic Setup
、
Radio
、
Security
and RS232 Setup settings by web browser.
Note: Make sure ones PC is located on the same subnet as
SW1601T.