Unitech MS860G, Руководство пользователя

Страница: 14 / 81

10 MS860G WiFi Manual
WiFi NETWORK SETTINGS
So, two things must be configured: the MS860G’s Wireless
Network settings, and the host computer’s Virtual Com Port
settings. Consult your network administrator for the
appropriate network wireless settings for your MS860G
which must be manually configured via Scanner
Configuration Manager or bar codes (see below and pages
24 to 39). VCOM should automatically create a “virtual com
port” for the Access Point to communicate data through. If
this doesn’t happen automatically, then refer to the
Troubleshooting section (page 71).
VCOM
The VCOM utility’s function is to convert incoming wireless
data into Virtual Com Port data that your computer expects
from a scanning device. Unlike SCM or Bar Code Scanning
(below) VCOM cannot modify the MS860G’s configuration.
VCOM simply pairs the MS860G’s existing IP address,
configured via SCM or bar code scanning (see below) with
its host computer(s) virtual com port.
Modifying the WiFi settings:
If the MS860G’s settings need to be manually modified, this
can be accomplished via the two different methods below,
each described in full starting on page 10.
SCM
Scanner Configuration Manager (SCM) is a proven and
powerful utility for scanner configuration. Easy to use, it is
probably the most straightforward method of modifying your
MS860G’s wireless settings. Because of the wireless
communication between the MS860G and the host
computer, SCM settings cannot be directly downloaded to
the MS860G. Instead, SCM provides for printing a series of
bar codes derived from SCM’s configuration, and these bar
codes are then scanned by the MS860G.
Bar Codes
Direct bar code scanning is the simplest, most direct, but
most tedious method of configuring the MS860G scanner.
Once mastered, however, it allows the user full “hands-on”
control over the MS860G’s wireless settings. Detailed
instructions for bar code scanning start on page 20.