![background image](http://html.mh-extra.com/html/unitec/portal-ti/portal-ti_installation-manual_844144011.webp)
P O R T A L T I +
Portal Installation Manual
7
Document #: PTL1001
2
Mechanical Installation
2.1
Hardware Required
Prior to beginning the installation, take the time to verify that all the following required parts
are present and accounted for.
Items supplied with the Portal:
Allen Wrench For Door
Key set for door
Key set for vault door
IEC-320-C14 Female AC Power Connector
Items supplied with the Base:
(3) ½: Hex Nuts
(3) ½” Flat Washers
(3) ½” Lock Washers
Items supplied with the Brick-in Option:
Adapter Plate
(4) J-Bolts and nuts (for securing the adapter plate)
(3) ½:” x 1” Hex Bolts
(3) ½” Flat Washers
(3) ½” Lock Washers
2.2
Recommended Tools
2.2.1
Mechanical Installation Tools
The following tools are recommended for the typical mechanical installation of this Portal TI+
unit and base:
¾” deep well socket and socket wrench
Open end 9/16” wrench
Small, thin blade, flat-tip screwdriver
Hammer
Dual-plane Level
50’ foot tape measure
Содержание Portal TI+
