P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
18
of
34
NOTICE
After completing maintenance and repair work and before restarting
production make sure that…
all materials, tools and other equipment which were required for maintenance
or repairs have been removed from the work area of the machine.
any fluid leaks have been removed.
all safety devices on the machine are functioning properly.
the oil level was checked.
fixtures of screw connections are checked.
any removed container covers, screens or filters have been re-assembled.
Inspection and maintenance can be done by the operator, disassembly and re-assembly of the
machine have to be executed by qualified staff only. Incorrect assembly can lead to danger of
accident for the operator and to defects on the machine.
ATTENTION
Parts can be damaged when falling down!
ATTENION– Danger of explosion!
Generation of sparks during maintenance work !
Observe local safety instructions.
NOTICE
Avoid applying any force when disassembling and re-assembling the machine.
WARNING
Unintentional start of the machine. Risk of injury by moving assembly parts!
Prevent machine from unintentional starting .
Only work on the machine, when all lines are disconnected.
WARNING
Operating supplies being dangerous to health !
Risk of injury!
Observe legal regulations.
Take preventive measures for persons and environment.
WARNING
Hot surface
Risk of injury!
Let the machine cool down to ambient temperature.
WARNING
Improper lifting/ moving of heavy assembly groups or assembly parts.
Injury to persons and damage to material!
Use appropriate means of transport, hoisting devices and clamp devices for
moving heavy assembly groups or assembly parts.
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16