P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
13
of
34
Safety Instructions for Prevention of Workplace Hazards
WARNING
The following applies unless otherwise stated in the machine’s
operating instructions booklet:
The machine is not insulated to protect against an electrical power surge.
CAUTION– Risk of injury!
Hands can be squeezed, entangled or otherwise hurt. Keep hands away
from areas being labeled with this warning symbol.
Caution – risk of injury!
Remove all sources of danger which could lead to slipping, tripping or falling
(e.g. slippery surface, hoses, cables).
Keep the work area clean and dry
PROHIBITION
Eating, drinking and smoking are forbidden during operation.
ATTENTION – Danger of explosion!
Only use the machine according to the intended use.
The machine is designed for the use in areas exposed to explosion hazards as
well. Please observe:
The generation of heat and possibly the generation of sparks is
characteristic for cutting work.
Work places nearby should always be protected from flying sparks, e. g.
by movable walls or curtains.
Flammable and explosive substances have to be removed from the work
area before starting the work.
Among others, this applies for dust deposits, cardboard, packing, textile,
wood and splints, but for flammable fluids and gas as well.
Make sure there is adequate lighting.
Be extra careful in unfamiliar surroundings. There is a risk of hidden hazards such as electric lines
or other supply lines.
Make sure when operating the machine that no electrical cables, gas pipes or similar equipment
could be damaged.
Use suitable and personal protective equipment.
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16
