P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
14
of
34
Safety Instructions for Prevention of Transport Hazards
DANGER
Improper transport
Danger to life by parts falling down! Damage of the machine!
Never attach the machine to the connection line.
Do not work or stay under suspended loads.
NOTICE
Separate the machine from any external energy source before transportation.
Check that the machine is undamaged and in proper condition.
Always install chain protection – also for transports at short distances and for storage.
Only carry the chain saw at the handle pipe – guide bar pointing backwards!
When transporting in vehicles:
Prevent saw from tilting and from damages. When the chain saw is not used, it has to be stored in a
way that it does not endanger others.
Operation Instruction
Maintain the saw regularly. Make only maintenance and repairs that have been described in the
Operating Manual.
Let other work be done by SPITZNAS service. Only original SPITZNAS spare parts should be used
.
Do not change anything at the chain saw. The safety could be endangered.
Disconnect from air supply
for checking tension of chain
for tensioning the chain
for changing the chain
for clearing a fault
Check the chain catcher,
Replace it, if damaged.
Pay attention to sharpening instructions for proper handling of chain and bar.
Keep chain in a perfect shape, properly sharpened and tensioned and lubricated.
Replace chain, guide and sprocket in due time.
Keep motor and chain lubricating oil only in correctly labelled and approved containers.
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16
