Unipulse UPM100, Руководство по эксплуатации

Страница: 33 / 89

24
4 UTM Ⅱ Capacity Setting
24
Chapter
4
5.
Set the "Rated output value".
The most significant digit will flash.
Confirm the specifications of the sensor in
use, press the keys to enter the
rated output value (V).
Press the key to move to a lower
digit and the key to move to a higher digit.
Press the key at the least significant digit to move to the most significant digit.
Press the key at the most significant digit to move to the least significant digit (initial
value: 5.000V).
Press the key to confirm and move on to the rated capacity value setting.
* Press the key to cancel the setting and return to indicated value display.
(5) Rated capacity value setting
* This setting can be configured only when "----" is selected in "(3) UTM Ⅱ capacity setting".
Register the torque (rated capacity value) of the sensor during rated output.
<<Setting value>>
±0.0100 to 60000 [Nm]
* The decimal point is not fixed and can be placed at any digit.
◇
How to set the rated capacity value
1.
Select capacity setting mode.
2.
Set the "(1) UTM
Ⅱ
capacity setting target selection".
* Performed only when two UTM
Ⅱ
are connected.
3.
Perform "(2) Zero calibration".
4.
Select "----" in "(3) UTM
Ⅱ
capacity setting".
5.
Set the "(4) Rated output value setting".
6.
Set the "Rated capacity value".
The most significant digit will flash.
Confirm the specifications of the sensor in
use, press the keys to enter the
rated capacity value (Nm).
Press the key to move to a lower
digit and the key to move to a higher digit.
V
A VA
var
W
rpm
PF
Nm
V
A
VA
var
W
rpm
PF
Nm
V
A VA
var
W
%
PF
V
A
°C
rpm
V
°C
Nm
1
3 2
Σ
1
3 2
Σ
1
3 2
Σ
1
AUX
2 Σ
ALARM
REC
FNC
USB RMS
MEAN
△ ▽
▽
▽
▽
▽
ENT
ESC
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
%
PF
V
A
°C
rpm
V
°C
Nm
1
3 2
Σ
1
3 2
Σ
1
3 2
Σ
1
AUX
2 Σ
ALARM
REC
FNC
USB RMS
MEAN
△
▽
▽
▽