Unipulse F160, Руководство по эксплуатации

Страница: 98 / 99

89
9 SUPPLEMENTS
89
SUPPLEMENTS
Chapter
9
9-3.
Initialization
It is possible to initialize it by the password input of setting mode 9 (setting code 99).
1231
：
A set value of mode 0 is resumed to an initial value.
1232
：
The set value memorized in NOVRAM other than Balance Weight, Capacity, Minimum
Scale Division, Net Over, Gross Over, Digital Zero Regulation Value, Decimal Place,
Gravitational Acceleration, Equivalent input calibration value, Zero Calibration point,
and Span Calibration point is resumed to an initial value.
Initialization is only a key input.
Moreover, a set value other than the above cannot be initialized.