Unipulse F160, Руководство по эксплуатации

Страница: 92 / 99

83
9 SUPPLEMENTS
83
SUPPLEMENTS
Chapter
9
Code Function Setting range
30 Digital filter 0000 (OFF), 0002 to 1024 [times]
31 Motion detection (period) 0.0 to 9.9
32 Motion detection (range) 00 to 99
33 Zero tracking (period) 0.0 to 9.9
34 Zero tracking (range) 00 to 99
35 Analog filter 0: 2, 1: 4, 2: 6, 3: 8 [Hz]
36 Filter in a stable condition 0: Insert (256times), 1: Not insert
37 Motion detection mode 0: Stable mode, 1: Checker mode
38 Option setting
No option
0 0 0 0 0
BCD Parallel Data Output Interface
0 3 0 1 0
CC-Link Interface
4 0 1 0 0
39
SI/F G/N selection 0: Gross weight, 1: Net weight
Code Function Setting range
40
Balance weight 00000 to 99999
41 Capacity 00000 to 99999
42
Minimum scale division 001 to 100
43 Net over 00000 to 99999
44
Gross over 00000 to 99999
45 Digital zero regulation value 0000 to 9999
46
Decimal place 0: 0, 1: 0.0, 2: 0.00, 3: 0.000
47 Gravitational acceleration 01 to 16
48
Calibration value LOCK 0: Release, 1: LOCK
49 Set value LOCK 0: Release, 1: LOCK
Undefined
Undefined
BCD output data form
0: BCD, 1: Binary
BCD output rate [Times/sec.]
0: 10, 1: 20, 2: 50, 3: 100,
4: 200, 5: 500, 6: 1000
BCD output data selection
0: Gross weight, 1: Net weight,
Output signal selection
0: Near zero, 1: Stable, 2: Weight alarm,
3: Sequence error, 4: Final error,
5: Zero alarm
2: Tare weight, 3: Ext.
Undefined
Station No.
1
to
63
Baud rate [bps]
0: 156k, 1: 625k, 2: 2.5M, 3: 5M, 4: 10M