Unipro UniGo One kit 1, Руководство пользователя

Страница: 22 / 56

22
Setup mode
C o n f i g u r i n g
t h e L a p t i m e r
ENTERING TEXT
You always use the same way to enter text in
UniGo. When starting, it is in “letter” mode.
Use the
left ( ) and right ( ) buttons to
change the current character. You will be able
to select both characters, numbers and a lot of
special characters. Each time you press the
ok
button ( ) you accept the selected character
and move the cursor in the text.
Entering text starts in letter mode. Press OK
after selecting the character you want.
When pressing the popup menu button ( )
a menu is shown. From this menu the mode
can be changed to “scroll”. This mode is used
to move the cursor in the text. Use the
left ( )
and right ( ) buttons to move.
Moving cursor around in the text using the
LEFT and RIGHT buttons in scroll mode.
To toggle between upper and lower case,
simply press the top right button twice. First
press to show the
popup menu and second
press to change the case.
If you make a mistake you can either delete
the last character you entered with the “
Back-
space” command, or clear the complete line
from the popup menu .
The Backspace menu line is only visible if
you are at the end of the text.
When finished with the text, press the
menu
button ( ) to save it.
When you are finished editing the text press
the
popup menu button ( ) and select
“ Save and exit ” to save the new text and
exit the previous screen. It is also possible to
exit without saving the text using the “
Exit ”
function.