Unipro UniGo One kit 1, Руководство пользователя

Страница: 14 / 56

14
Gray splitter for temperature and black for
receiver and speed.
Two splitters mounted to increase number
of sensors.
Two different cable splitters are used. A gray
version is used for temperature and a black
version for everything else.
The splitters reduce the number of cables to
the steering wheel.
The splitters reduces the number of cables to
the steering wheel and is part of the perma-
nently installation. Make sure that splitters are
securely fasten to the frame.
WATER TEMPERATURE
The water temperature sensor is typically
mounted in the T-junction that goes into the
cooling water hose. First mount the sensor in
the T-junction and then mount the T-junction
the hole. Make sure the hose is waterproof by
tightening the clamps.
T-junction mounted in the cooling water
hose with a temperature sensor.
CYLINDER TEMPERATURE
The cylinder head temperature is measured just
below the spark plug. The cylinder temperature
sensor is available in two different sizes and it
is important to order the right one.
Sensor mounted instead of the washer on
the spark plug.
I n s t a l l i n g t h e
L a p t i m e r
Installation