UniPOS FS5100, Инструкция по эксплуатации

Страница: 30 / 47

UniPOS Fire Control Panel FS5100
Instruction Manual Page 30
Revision 7/06.12 Of 47
14.2.2. Menu Line parameters
Select the menu from the screen:
It includes the same screens as the analogical submenu of the menu Parameters review (see
section 13.2.7.2) with one difference only: when button is pressed, a screen for parameter
change appears and the parameters can be modified within specified limits.
The modification of parameter Logical AND has the following special features:
−
A line can not be set in Logical AND dependency by itself – button is not active in this
case;
−
A line can not be set in Logical AND dependency by a line that has already been set in such
dependency by a third line - button is not active in this case either;
−
Where a line is set in Logical AND dependency by another line, the second line is
automatically set in the same dependency – in the parameter Logical AND of the second line
the number of the first line is saved;
−
Where a line exits the Logical AND dependency, the second line exits the dependency too –
in the parameter of the second line is saved “0”;
−
The Logical AND dependency can cover only two fire alarm lines – if, before the modification
of the parameter Logical AND, it contained a number of a third line, the third line automatically
exits the dependency (in the third line’s parameter Logical AND is saved “0”)
14.2.3. Menu Fire control panel parameters
Select the menu from the screen:
It includes the same screens as the analogical submenu of the menu Parameters review (see
section 13.2.7.3) with the following differences:
−
When button is pressed, a screen for parameter change appears and the parameters
can be modified within specified limits
−
Screens for telephone number entry: press button to move the cursor one position to
the right. Where the telephone number contains more than 12 characters moving the cursor
from the 12th to the 13th character will result in moving the information on the display 8
positions to the left; i.e. characters from 9 to the last one will be displayed. If you press button
, when the cursor is positioned over the first empty position after the telephone number
or is over the 20th character, the beginning of the telephone number will be displayed and the
cursor will be positioned over the first character (the dial mode).
14.2.4. Function Adjustment of controllable outputs
Activate the function from the screen
When the function is active the following command screen
appears:
where
Х
can adopt 0 (the controllable output will not operate) or 1 (the controllable output will
operate). The left position corresponds to Controllable output 1. Press button to activate the
selected controllable outputs and keep them active by holding the button down. Deactivate the
function by pressing the button .
cO Adj
ХХ
cO Adj
Fire Panel
Line