UCD Console for UCD-340 User Manual | Unigraf Oy
54.
Request ID 12
Request for operator to check video pattern and respond with “pass” if video playback is
correct, and with “fail” if video playback is not correct. The following parameters are
included:
•
“op” – ID for this request (12)
•
“exit_pass” – Value for the application to return for “pass” response.
•
“exit_fail” – Value for the application to return for “fail” response.
Request ID 13
Request for operator to play the “ping test pattern” audio stream three times and verify it
played correctly. If the playback is correct, respond with “pass” or if the playback was not
correct, respond with “fail”. The following parameters are included:
•
“op” – ID for this request (13)
•
“exit_pass” – Value for the application to return for “pass” response.
•
“exit_fail” – Value for the application to return for “fail” response.
Request ID 14
Request for DUT to write FEC_READY bit in DPCD register 0x120
FEC_CONFIGURATION. The following parameters are included:
•
“op” – ID for this request (14)
•
“exit_proceed” – Value for the application to return as its exit code.
Request ID 15
Request for DUT to send the ENABLE_FEC sequence as described int the DP specifications.
The following parameters are included:
•
“op” – ID for this request (15)
•
“exit_proceed” – Value for the application to return as its exit code.
Request ID 16
Request for DUT to send the DISABLE_FEC sequence as described in the DP specficiations.
The following parameters are included:
•
“op” – ID for this request (16)
•
“exit_proceed” – Value for the application to return as its exit code.
Operator Feedback configuration items
The following configuration items are used to configure the operator feedback mechanism.
TSI_TS_OF_MODE
TSI_TS_OF_MODE
0x215
unsigned int of_mode
U32
4 bytes
RW
Synopsis
Currently not configurable as only a single mode is available. In this mode TSI will run an
external application when a test needs operator feedback or intervention with the test.
Содержание UCD-240
Страница 1: ......
Страница 76: ...UCD Console for UCD 340 User Manual Unigraf Oy 76 ...