UCD Console for UCD-340 User Manual | Unigraf Oy
48.
(...Continued)
The external application is expected to parse the key-value pairs and result in the DUT
carrying out the requested operation. It is up to the designer of this application to decide how
to implement it.
The external application is expected to return one of the response values listed in the
requested information based on the outcome of the operation.
TSI Default application operation
The default application will show a command-prompt window with a message to the test
operator, and wait for the test operator to enter a response. Possible responses are:
•
‘Enter’
only → “Proceed” response.
•
‘P’
+
’Enter’
→ “Pass” response. (Note: Case-insensitive)
•
‘F’
+
’Enter’
→ “Fail” response. (Note: Case-insensitive)
Entering an invalid response, or a response that is not listed in the request information will
not be accepted and the application will repeat the prompt for a valid response.
Request parameters
When a test requires operator intervention to configure the DUT and/or other operator
feedback, TSI will run the defined application with command-line parameters that define the
contents of the request. The command-line parameters are passed as a key-value pair script.
The key-value pair script assumes the following rules in its syntax:
•
“KEY” and “VALUE” -fields are separated with the equal character (‘=’).
•
“VALUE” -field is followed by a semi-colon (‘;’).
•
“KEY” and “VALUE” -field pair must be on a single line of text.
•
If either the “KEY” or “VALUE” -field contains spaces, the field must be enclosed
with single quote-marks.
•
Strings: The closing single-quote-mark also marks end of the field being processed.
•
White-spaces characters are allowed anywhere outside “KEY” and “VALUE” -
fields.
•
New-lines (and white-spaces) may always appear before beginning of the next
“KEY” -field. For example, at start of file and after semi-colon (‘;’) ending the
previous key-value pair.
The “KEY” -fields are always character strings, and “VALUE” -fields are decimal numeric
values. Please see the table on the next page for a list of the “KEY”-fields generated by TSI,
along with the meaning of the associated “VALUE”-fields.
(Continued...)
Содержание UCD-240
Страница 1: ......
Страница 76: ...UCD Console for UCD 340 User Manual Unigraf Oy 76 ...
