Unigraf UCD-240 Скачать руководство пользователя страница 51

Страница: 51 / 78

UCD Console for UCD-340 User Manual | Unigraf Oy

51.

(...Continued)

Key

Value / Description

Refere

nce

“dp_lanes”

Indicates number of DP lanes to be used in the next link
training performed by the DUT

“dp_linkrat
e”

Indicates link-rate of DP lanes to be used in the next
link training performed by the DUT. The link rate is
provided as a multiplier of 0.27Gbps.

“aud_pat”

Indicates the requested audio pattern type

Operator specific

Sawtooth pattern

“aud_chn”

Indicates number of audio channels to send. Typical range from 2 to 8.

“aud_freq”

Indicates the sampling rate of the audio stream to send, as Hz.

“aud_bits”

Indicates the sample size as number of bits.

“aud_alloc”

Channel allocation bits to be used. The bits are passed as a decimal number.

Important:

A value of zero mean no channel allocations bits to be used – This is

valid for stereo audio.

Bit

Purpose

FL + FR (Front-left and Front-right channels present)

LFE (Low-frequency-effects channel present)

FC (Front-center channel present)

RL + RR (Read-left and Rear-right channels present)

RC (Rear-center channel present)

FLC + FRC (Front-left-of-center and Front-right-of-center channels present)

RLC + RRC (Rear-left-of-center and Rear-right-of-center channels present)

FLW + FRW (Front-left-wide and Front-right-wide channels present)

FLH + FRH (Front-left-high and Front-right-high channels present)

TC (Top-center channel present)

FHC (Front-high-center channel present)

“aud_ppr_1”

…

“aud_ppr_8”

Indicates the pattern period as number of samples.

Important:

The values are only present for number of channels requested. Do not

expect there to always be same number of period keys.

Important:

the values will not be passed if the requested audio pattern is not

“sawtooth”.

Содержание UCD-240















































































Результаты поиска

Содержание UCD-240

Отзывы:

Похожие инструкции для UCD-240

Бренды по названию

Популярные бренды

Unigraf UCD-240, Руководство пользователя

Результаты поиска

Содержание UCD-240

Отзывы:

Похожие инструкции для UCD-240

Бренды по названию

Популярные бренды