English - 14
answering system answers any incoming calls without playing anything
through the speaker.
1. With the phone in standby, press and hold
#sIlEnT
on any handset or
sIlEnT
on the
base for one second. The phone prompts you to select the
number of hours (
1
-
9
or
Always On
) that you want it to stay in silent
mode.
2. Select the number of hours using the up or down key.
3. To confirm, press
#/sIlEnT
on any handset or
sIlEnT
on the
base. You
can also just wait about 5 seconds. The phone turns on the answering
system and displays
Silent Mode On
.
4. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#/sIlEnT
on any
handset or
sIlEnT
on the
base again.
#
If you do not make an entry, after 5 seconds the phone goes into
Standby mode without the confirmation tone but will turn on
Silent mode.
#
If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode
Multihandset Features
#
To use the features in this section, you need at least 2 cordless
handsets and 1 cordless handset for accessory handset.
• Your base supports a total of 12 cordless accessory handsets, including
any that came with your phone.
• You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
• Handsets that aren’t registered display a
Not Registered
message. For
registration instructions, see page 23 or see the accessory handset manual.
• If a handset was ever registered to a base, you must reset it before it can
register to a new base; see page 22, or see the accessory handset manual.
Conference Calling
• When an outside call comes in, two cordless handsets and the base can
join in a conference call with the outside caller.
• To join a call that’s already in progress, just press
Talk/Flash
on the
handset or
sPEakEr
on the base.
• To leave the conference call, hang up normally; the other stations
remain connected to the call.