English - 17
Voice Message Notification
• If you subscribe to a voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying
(FSK) notification. Contact your voice mail provider for information.
• When you have new messages, the display shows a message icon. After
you listen to your messages, the message icon turns off. If it doesn’t, you
can reset it: With the phone in standby, open the menu and select
Global
Setup
; select
VMWI Reset
, then select
Yes.
USING THE ANSWERING SYSTEM
Answering System Options (
Answering Setup
)
You can set or change the answering system options from any station. Just
open the menu and select
Answering Setup
. Select one of the following:
Submenu
Purpose
Security Code
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 19).
Ring Time
Set the number of rings (
2
,
4
, or
6
) before the system
answers. If you call in remotely to check your messages,
Toll Saver
makes the system answer after 2 rings if you
have new messages or after 4 rings if you don’t.
Record Time
Set the amount of time (
1
or
4
minutes) callers have to
leave a message. Choose
Announce Only
if you don’t want
the system to let callers leave a message.
Message Alert
Have the base beep every 15 seconds when you have a
new message. The alert stops after you listen to all your
new messages or if you press any key on the base.
Ans. Language
Change the language of the system’s voice prompts.
Call Screen
Turn on the call screen feature so you can hear callers on
the base speaker as they leave messages (see page 18).
Ans. On/Off
Turn your answering system on or off. (Handset only)
You can also press
ans on/oFF
on the base.
Record
Greeting
Record an outgoing message or greeting (see below).
