English - 22
Caller ID problems
Possible solutions
Caller ID displays briefly
and then clears.
x
You may have to change the line mode.
Contact Customer Service for instructions.
Multistation problems
Possible solutions
I can’t transfer calls.
x
Reset all the stations (see page 21).
Two handsets can’t talk to a caller.
x
See if any station is in Privacy Mode.
A handset says
Unavailable
.
x
Move the handset closer to the base.
x
See if any station is in Privacy Mode.
I can’t register a new handset.
x
Reset the handset (see page 21).
x
See if you have 12 registered handsets.
Answering system problems Possible solutions
The answering system does
not work.
x
Make sure the answering system is on.
x
Make sure the base is plugged in.
The system won't record
messages.
x
See if
Record Time
is set to
Announce Only
.
x
Delete messages (memory may be full).
A handset can't access the
answering system.
x
See if another handset is using the system.
x
Make sure the phone is in standby.
My outgoing message is gone.
x
If there was a power failure, re-record
your personal outgoing message.
I can’t hear the base speaker.
x
Make sure call screening is turned on.
x
Change the base speaker volume.
Messages are incomplete.
x
Increase the
Record Time
.
x
Delete messages (memory may be full).
The system keeps recording
when I answer on an
extension.
x
You may have to change the line
mode. Contact Customer Service for
instructions.
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone
line from causing interference on your phone. To get a line filter, contact
your service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.
