background image

 

Manual – Starflow QSD Model 6527B and 6537A

 

 

 

Unidata Manual - 6527B and 6537A Starflow QSD User Manual 08 05 2023.docx 

Page 106  

 

 

 

17.11. 

Effects of Surface Ripples 

In shallow water, the presence of ripples or small waves on the surface can cause 
complications.  The ripples may be caused by wind or be a feature of the channel caused by 
obstructions in the channel or by irregularities on the bank.  Ripples will be moving at a 
different velocity to the water.  

In shallow and clean water, the Starflow QSD can clearly see the surface.  As the ripples 
move, they present a varying effect on the Doppler signal.  At times the ripples will be 
positioned so that the carrier reflects away from the Starflow QSD.  A minor signal is 
detected, but many more signals are detected from the water, and a correct velocity is 
measured. 

            

 

When the ripples move slightly, one can become positioned such that it becomes an 
“acoustic mirror”, reflecting back a powerful signal and dominating the signals from the 
channel.  The median velocity will be biased toward the ripple velocity and will be incorrect. 

 

                              

 

Содержание Starflow QSD 6527B


















































































































Отзывы: