Manual – Starflow QSD Model 6527B and 6537A
Unidata Manual - 6527B and 6537A Starflow QSD User Manual 08 05 2023.docx
Page 72
the “calibration” of the Starflow QSD. Later, when all parameters are set accurately these
channels can be unselected.
11.1.
Configuring the Starflow QSD as an SDI-12 Sensor
When the Starflow QSD is an SDI-12 sensor, other SDI-12 recorders can access, and log
data sensed by it. This can be useful if you have something with a limited number of inputs,
such as a Starflow QSD, but would prefer to have all data at a site logged by a single logger.
You could configure the Starflow QSD as an SDI-12 sensor and use a Neon Remote Logger
(IP logger) as an SDI-12 recorder to log the depth/velocity/flow from the Starflow QSD, as
well as whatever other instruments you have (e.g., wind speed/direction, air temperature,
rainfall).
To set a Starflow QSD as an SDI-12 sensor as well as a logger:
1. Click on the Sonic Icon
2. When the SONIC window appears click on the Connect button
