Operating and mounting manual
(translation)
EVF
_______________________________________________________________________________________________________
220.100.112-07
Page 9 /13
Version: 12/2015
TM 3926
9.0 Warranty
Scope and period of the warranty is specified in the edition of the “General Terms of Business of the
UNI-Geräte E. Mangelmann Elektrotechnische Fabrik GmbH” valid at the time of delivery or else in the
purchase agreement.
We warranty that the valve is free from faults in line with the state of the art and for the confirmed field
of application.
No warranty claims will be accepted for damage resulting from improper use or failure to observe
these operating and installation instructions, the statutory accident prevention regulations, the EN, DIN
and VDE standards and other codes and regulations.
Warranty claims will also not be accepted for damage occurring during operation due to operating
conditions deviating from those specified in the data sheet or in other agreements.
Justified complaints will be remedied by reworking by us or specialist companies authorised by us.
Claims going beyond the scope of the warranty will not be accepted. The customer shall have no right
to the supply of a replacement valve.
Maintenance work, installation of parts from other manufacturers, any modifications to the design and
natural wear are not covered by the warranty.
Transport damage must be reported not to us but
without delay
to your responsible goods handling
company, the railway company or the shipping agent as otherwise all claims for damages against
these companies will be voided.
10.0 Explanations on Codes and Directives
The Commission of the European Union has laid down common directives for the free trading of
goods within the Union specifying minimum requirements for safety and health protection. The CE
symbol confirms that products comply with the EU directives, i.e. in conformity with the relevant, in
particular harmonised standards. Directives 97/23/EC are of relevance for the gas solenoid valve
(mechanical part).
Notes on Directive 97/23/EG (Pressure Equipment Directive, PED):
It has been conformed that the quality assurance in design control, manufacture and final acceptance
of the manufacturer, UNI-Geräte E. Mangelmann Elektrotechnische Fabrik GmbH, satisfy the require-
ments of 97/23/EC Annex III Module H. The gas solenoid valves comply with the fundamental require-
ments of Directive 97/23/EC. Valves with permissible working pressures
≤
0.5 bar, DN
≤
25 and all
products certified in accordance with category I and with 94/396/EEC are not covered by 97/23/EC.
Only products covered by DGRL and classified in category I or higher may be marked in accordance
with 97/23/EC. Fluid group 1 includes explosive, inflammable and toxic media. Fluid group 2 includes
media not belonging to fluid group 1.
Note concerning ex-guideline 94/9/EC (explosion guideline ATEX):
The product is not subject to guideline 94/9/EC, since due to the loads occurring during practical
operation, there is no effective source of ignition even in case of an error case to be assumed. This
also applies for spring-loaded components, in gas-filled rooms. In case of electric drives, sensors or
other electric components the application as per 94/9/EC is to be checked separately.
