UNELL SN-F22-B, Руководство пользователя

Страница: 57 / 98

Bi-spectrum network camera
User Manual
Thermal Sensor Configuration
Issue V 1.0
（
2020-10-19
）
55
Figure 5-3 Image setting interface
Step 1 Click in the lower left corner of Sensor Setting, and choose Debug
Mode .
Step 2 Drag the slider to adjust parameter of image.
Step 3 Click Save , the message " Save succeed " is displayed, the system saves the settings.
NOTE
⚫
Brightness :It indicates the total brightness of an image. As the value increases, the image
becomes brighter. It ranges from 0 to 100.
⚫
Contrast
：
It indicates the contrast between the bright part and the dark part of an image.
As the value increases, the contrast increases. It ranges from 0 to 100.
⚫
Sharpness: it indicates the contrast between definition and edge sharpness. The higher
value, the higher definition and greater distortion. It ranges from 0 to 100
----End
5.4 Scene
Figure 5-4 shows the Scene setting interface.