UNELL SN-F22-B, Руководство пользователя

Страница: 36 / 98

Bi-spectrum network camera
Temperature Measurement User Manual
34 Issue V 1.0
（
2020-10-19
）
Parameter Description Setting
Adaptation environment
temperature Set the ambient temperature, and
click “Apply”, click “Refresh” ,the
camera will obtain automatically. ---
3.3 Thermal Mapping
NOTE
⚫
This function will be set up before leaving the factory, user don’t need to
modify it. If the images of two channels are deviation too much, these must be
calibration, user should contact the technical staff of manufactory avoid
modifying errors.
Operation Procedure
Step 1 Choose Configuration > Temperature Measurement >Thermal Mapping, as
shown in Figure 3-6.
Figure 3-6 Thermal mapping interface