UNELL SN-F22-B, Руководство пользователя

Страница: 37 / 98

Bi-spectrum network camera
User Manual
Temperature Measurement
Issue V 1.0
（
2020-10-19
）
35
Step 2 Settings please refer to Table 3-5.
Table 3-5 Parameter of thermal mapping
Parameter Description Setting
Zoom in /zoom out. [Setting method]
Click the button
Near focus / far focus. [Setting method]
Click the button
Lock focus position N/A [Setting method]
Tick .
ID There are 8 scenes can be calibrated. [Setting method]
Select from drop-
down list .
Scene depth The distance of the clear image
presented within the range before and
after the focus. [Setting method]
Input value
Mapping point You need map three points at two
channels. Points are correspond of each.
The three points should cover most
areas, and two points are located in the
diagonal display of the picture.
Point one is green cross.
Point two is red cross.
Point three is blue cross.
[Setting method]
Select from drop list .
Step 3 Click Apply . The message " Apply success " is displayed, the system saves the
settings.
----End
3.4 Bad Point Check
NOTE
⚫
If the image is defect by detector’s fault, user can test the function to recover
the bad point. User should connect the manufactory at this condition to make
sure to apply.