background image

 

AP01-HD_rev.09_UK 

9

 

Frequency 

Frequency range 

VHF/UHF/SAT from 45 to 2150 MHz (2); HF from 5 to 65 MHz

Tuning 

PLL frequency synthesis with direct setting of frequency, 
channel or stored program through keypad and/or shaft 

encoder 
Possibility of selecting the channelization in force in the 

country where the instrument is used 

Storage capability 

200 programs 

Display 

Frequency in MHz, channel name and program number 

Resolution 

50 kHz steps in HF/VHF/UHF, 125 kHz  steps in SAT 

Accuracy 

Better than 0.001% 

Spectrum analyzer 

Presentation 

Level on "Y" (vertical) axis – Frequency on "X" (horizontal) 
axis 

Frequency range 

From 5 MHz to 2150 MHz (in 5 bands) in real time 
 

5 ÷ 65 MHz 

 

45 ÷ 156 MHz 

 

156 ÷ 454 MHz 

 

454 ÷ 900 MHz 

 

SAT  900 ÷ 2150 MHz 

Level 

VHF/UHF/SAT bands from 20 to 130 dBµV 
C band 5÷65 MHz from 40 to 130 dBµV 

Dynamic range on 
screen 

40 dB for HF/VHF/UHF/SAT bands 

Explored frequency 

range 

100% of each selected band (C - L - M - H - SAT) with 
possibility of exploring in 8 steps (6 in C band)  a portion of 

approx. 1% (in SPAN MIN) up to 1 ÷5 channels (depending on 
the band) in SPAN MAX 

Bandwidth 

At - 3 dB 

HF/VHF/UHF bands: 100 kHz or 1 MHz (selectable). 

SAT  band: 100 kHz, 1 MHz (selectable) 

Video filter 

Included - excluded (selectable) 

Frequency markers 

2, direct reading of frequency, measurement of frequency 

difference "

Δ

 F" between the two markers 

Measurement of level and measurement of level difference "

Δ

 

L" between the two markers 

 

Содержание AP 01 HD

























































Отзывы: