AP01-HD_rev.09_UK
17
4.5.2.
USE OF LOCAL OSCILLATORS (LO)
Pressing more times the
LO (4)
key, the satellite frequency will be displayed as follows
(depending on the selection):
FOR “LO DEFAULT”:
•
1
st
IF: 1
st
IF frequency is displayed
•
LO 1: the tuned frequency related to the 9750 MHz local oscillator is displayed
•
LO 2: the tuned frequency related to the 10600 MHz local oscillator is displayed
FOR “LO USER":
•
1
st
IF: 1
st
IF frequency is displayed
•
LO 1: the tuned frequency related to the set local oscillator is displayed
•
LO 2: the tuned frequency related to the set local oscillator is displayed
•
LO 3: the tuned frequency related to the set local oscillator is displayed
•
LO 4: the tuned frequency related to the set local oscillator is displayed
4.5.2.1.
CHECK THE CHANNELIZATION IN USE
Keeping the
CH
key
pressed,
the menu appears on the screen. Select CHANNEL TABLE to
check the channelization in use.
4.6.
PROGRAM STORAGE
Remember that stored programs are used also by the Data Logger.
In order to store a frequency or channel in one of the 100 available storage locations,
proceed as follows:
I.
Set the program number where the frequency (or channel) must be stored
II.
Set the frequency (or channel)
III.
Press the “
2nd
” key and then the
STORE
key
IV.
Make the same to store further programs.
PLEASE NOTE: if the LNB power-supply voltage is inserted when storing, this will
be applied by the Data Logger, and not by the direct recall of a program.
⇒
The channel storage requires, besides the acquisition of video/audio carriers, also the
acquisition of other parameters such as "BW" (bandwidth), "STD" (TV standard).
Therefore, when you recall a program with SAT frequency from the memory, also video
and audio are displayed; it is recommended to first tune the desired audio subcarrier,
before storing a SAT channel.
4.6.1.
PR ENGAGED MENU
Keeping the
PR STORE
key pressed, you enter the menu for inspection/modification of
stored channels. Once you have carried out the desired operations, press
PR STORE
again
to exit menu.
