AP01-HD_rev.09_UK
19
As shown above, for terrestrial channels you can see the program number, the program
name set by the user, the frequency, the TV standard, the channel number, the channel
format, the type of demodulator, the measurement bandwidth, the LNB voltage and
possible activation.
For satellite channels, the TV standard is substituted by the video polarity and the channel
is substituted by the local oscillator. Channelization is not necessary.
In the middle of the screen there are reception parameters for digital channels or the
frequency of audio subcarrier for analogue satellite channels. For satellite channels, both
analogue and digital, also the transmitted DiSEqC command is indicated. The lower part of
the screen sets out the indication (ON / OFF) of further measures in case of Data Logger:
C/N, V/A for analogue channels and BER digital channels.
Turning the shaft encoder, all stored programs can be displayed.
The display program may be changed as follows:
•
Press
ENTER (8)
and select the desired item through the shaft encoder.
•
Press
ENTER
and change the value through the alphanumeric keypad or the shaft
encoder.
•
Press
ENTER
to confirm.
You can also:
•
store the displayed program pressing
2nd + STORE
•
delete the displayed program as follows: keep the
PR STORE
pressed a few seconds,
select
SINGLE or ALL
turning the shaft encoder, press
ENTER
, select
YES
and confirm
pressing
ENTER
.
Press
PR STORE
to exit function.
