UHV Design MD40 Series, Инструкция по эксплуатации товара

Страница: 3 / 56

MD40 PRODUCT INSTRUCTION MANUAL
MD40 Page 3 of 56 Author: N.Carapiet | Revision: 1.1
IMPORTANT SAFETY INFORMATION!
This document is intended as a user guide to operation as determined by the design.
The instrument described in this document should not be used on any system where toxic,
flammable, corrosive or otherwise hazardous gases or substances may be introduced without prior
discussion with UHV Design.
Hands and fingers should be kept well clear of any moving parts during operation or whilst at
vacuum.
This equipment should be put into service only by Competent Persons who have first studied this
manual and followed carefully the recommended procedures.
INSTALLATION & OPERATION
This manual covers installation and operation for standard MD40 configurations:
Manual Actuation
•
Example Part Numbers:
MD40TX000Z, MD40DX000Z, MD40DX000CE
Motorised Actuation
•
Example Part Numbers:
MD40IS1X000Z, MD40SS3X000Z, MD40ISES2DX000CE
Pneumatic Actuation
•
Example Part Numbers:
MD40RAX000Z, MD40RAIX000Z