UGO BASILE 37370, Инструкция по эксплуатации

Страница: 17 / 44

Page 10
37370 Instruction Manual (Rev. 0)
4.7 Installation of CUB software
The CUB software is contained in the USB pen-drive provided with the instrument. Install
it on your PC.
At the first installation, a code will be generated: send the code to registra-
tion@ugobasile.com to receive an
activation key
.
From the installation, you have 30 days to enter the activation key; when the 30 days trial
period expires, it will not be possible to activate the software and it will be necessary to
uninstall and install it again (ask for instruction at our Customer Support, see paragraph
10.7).
4.8 Intended Use
The Plantar Test is intended for investigation use on laboratory animals only.
4.9 General Safety Instructions
The following guidelines must be followed to ensure safe operation.

DO NOT
attempt to open or perform any service work

DO NOT
connect up human subjects
4.10 Additional Safety Consideration
a.
Place your Plantar Test on a flat surface;
b.
Pay attention when handling the glass-pane; in case of breakage, use heavy
duty gloves to handle the glass pieces and chips;
c.
Do not obstruct free and comfortable access to the power module;
d.
Use original accessories and spare parts only, see also paragraph 12-
ORDERING INFORMATION
e.
Immediately disconnect and replace a damaged mains cable;
f.
Do not operate the instrument in hazardous environments or outside pre-
scribed environmental limitations (i.e. +18C°/+24C°, 60% relative humidity,
non-condensing);
g.
Do not spray any liquid on the connectors;
h.
Keep inflammables far from the heating source.
UGO BASILE DOES NOT ACCEPT ANY RESPONSIBILITY FOR PROBLEMS OR
HARM CAUSED TO THINGS OR PERSONS, ARISING FROM:

incorrect electrical supply;

incorrect installation procedure;