- 12 -
Technical data
Attaching and removing the bicycle rack
Mounting the bicycle rack on the vehicle
1. Open the cover of the bag
1
(18).
2. Press the safety lever (11) so that the attachment (10) comes out.
3. Hold the bicycle rack (1) upright and push it with the
attachment (10) onto the ball head of the towbar (19).
4. Tilt the bicycle rack (1) downwards until the safety lever (11)
audibly engages.
The red marking on the safety lever (11) must no longer
be visible.
5. Check that the bicycle rack (1) is parallel to the bumper
and roughly parallel to the ground.
Shake the bicycle rack (1) to check that it is firmly fitted.
If necessary remove the bicycle rack (1) and mount it again.
6. Pull the bag (18) off the bicycle rack (1).
Rack weight
Uebler F14, for max. 1 bicycle
Approx. 21.8 lbs (9.9 kg)
Uebler F24, for max. 2 bicycles
Approx. 26.5 lbs (12 kg)
Uebler F34, for max. 3 bicycles
Approx. 32 lbs (14.5 kg)
Maximum load (bearing capacity)
Uebler F14, from D-value
1
5.3 kN
- At towbar load min. 110 lbs (50 kg)
1. See type plate on towbar
66 lbs (30 kg)
Uebler F24, from D-value
1
5.3 kN
- At towbar load min. 110 lbs (50 kg)
84 lbs (38 kg)
Uebler F24, from D-value
1
6.7 kN
- At towbar load min. 110 lbs (50 kg)
- At towbar load min. 165 lbs (75 kg)
84 lbs (38 kg)
132 lbs (60 kg)
Uebler F34, from D-value
1
5.3 kN
--
2
2. Not permissible
Uebler F34, from D-value
1
6.7 kN
- At towbar load min. 110 lbs (50 kg)
- At towbar load min. 165 lbs (75 kg)
78.3 lbs (35.5 kg)
119 lbs (54 kg)
Power supply
Uebler F14, for max. 1 bicycle
13-pin, 12 V
Uebler F24, for max. 2 bicycles
13-pin, 12 V
Uebler F34, for max. 3 bicycles
13-pin, 12 V
Maximum tube diameter of bicycle frames
Round tube
3 inch (75 mm)
Oval tube
3x2 inch
(75x45 mm)
Attention
The towbar must be suitable for mounting a bicycle rack:
•
The towbar must be made of St52-3 or stronger
(see type plate on towbar).
If not, the bicycle rack and the bicycles mounted on it may
come loose from the vehicle, injuring you and other persons,
or may cause an accident.
The ball head must be cleaned and degreased prior to
mounting.
Attention
Failure to take account of the altered vehicle dimensions
(width, height, depth) with the bicycle rack attached may cause
injury to you and other persons and/or cause damage to
property.
Please take account of the altered vehicle dimensions
when driving through entrances and narrow passages.
Be careful when reversing.
Attention
Check that the lights are in perfect working order prior to each
journey, otherwise accidents may be caused.
1. Bag optionally available (for Uebler F24 rack item no. 19840,
for Uebler F34 rack item no. 19850)
11
10
1
18
19
M+P-25A-0230