23
Menu 09 Select Function List
The items selected from the function list will be displayed on the Function Bar of the Main Display panel or on
the Storage Display during operation modes. You can select all or none. Be advised that if Setup Mode is
turned off, when you return to the operation mode, it will not be displayed on the function bar. If there is a need
to return to the setup mode, you will have to revert to option
b
in the
“How to use setup mode”
section
explained above.
1.
Follow the steps in Enter the
Setup Mode
as described earlier
2.
Spin to
Menu 09
,
Select Function List
3.
Click the Sensitivity Control Dial to enter.
4.
Select Main Menu List or Storage Menu list
5.
Spin to the Function you wish to change (add or remove)
6.
The Function will default to YES, to deselect, Spin to NO
7.
Click to set
Menu 10: Text Editor Select
Text Editor
will enable or disable text entry during the operation mode. If text notes are to be manually entered, select the
ON
mode.
If text has been preset in the Ultratrend
™
software or if text entry is not needed, select
OFF
.
The
Text Editor
can be set by entering the
Setup Mode
.
1.
Spin to
Text Editor
.
2.
Click the
Sensitivity Control Dial
to enter the
Text Editor
enable mode.
3.
Spin the
Sensitivity Control Dial
to select
OFF
or
ON
.
4.
Click the
Yellow ENTER button
to exit.
Menu 11: MORE
This moves the setup menu into the next level: items 12 through 35
Click the
Sensitivity Control Dial
to move to the next level of Setup Menus.
Menu 12: Default Settings
This mode allows users to retain or to delete the information stored in the instrument. The instrument will re-set to original factory
default settings. In addition there are user defined defaults that can be set when with this setup option.
Factory Defaults:
Confirm
YES
means that the onboard computer will default to original factory settings and
all stored data will be deleted
. Confirm
NO
retains all stored data and current instrument settings.
The Factory Default Settings:
Maximum Sensitivity (S= 70)
Frequency = 40 kHz
Display Mode = Real Time
Display Screen = Main
Application Select = Generic
Instrument Setup = Manual
STD or Metric Units = STD
dB Scale = Relative
Offset Value = 0
spin
Text Editor = (ON)
click
Menu
08
Select
Text Editor
Press ENTER to exit
Text Editor = OFF
