4.4. Operating indicator lights (LED).
The unit has in the front panel just a few lights that give us the following information:
1. STANDBY/ON.
It indicates if unit is operating (GREEN) or off (RED).
2. FAULT.
When lit (RED) indicates general failure condition of the unit or degradation of the audio files supervised (Security
installations). This indication is related to the FAULT open contact condition on the rear side.
3. MUSIC ON.
When lit (RED) indicates active music playback mode.
4. MESSAGE ON.
When lit (RED) indicates active message/calendar playback mode.
5. REC ON.
When lit (RED) indicates the recording mode is active and the user can record a new message.
4.5. Turn ON/OFF the unit.
The equipment has been designed to support the continued operation, but in certain situations may require disconnection. This
should be kept the "OK" button down for few seconds and then released it; just at this moment the unit will shut down to low power
mode. At that time the STANDBY LED (RED) lights indicating that the unit has gone to standby mode.
To turn on the unit again just hold down the "OK" several seconds and then release it. At that point the STANDBY LED turns off
and the ON LED lights ON (GREEN) and the display shows the starting process information. After few initialization seconds, the
unit is fully operative.
NOTE:
The display automatically goes into shutdown mode after several minutes of inactivity (no user operation), but the unit is in
a fully operational state. In this condition the ON LED remains lit. Pressing any key on the front panel, or if is detected any external
or scheduled event, the display is automatically turn on to show the new device state.
5. BASIC SETUP.
To enter in the setup mode is necessary that player was paused or stopped, then press
MENU to enter in the MAIN MENU.
Within the MAIN MENU there are functions that can be executed by any user, but there
are other that request a Password to access to advance features. These latter are
accessed after selecting the "Service Menu".
Use the cursor keys to select the desired option and confirm with OK, or at any time
using the BACK key can return to the main screen.
Use the cursor kys to select the desired option and OK to confirm, but using the BACK
key to come back to the main screen.
4.3. Keyboard.
To manage the behavior of the device, it features a navigator keypad comprising 4 arrow keys (up, down, left and right) plus a
validation key (OK), and additionally to use the basic functions, have been provided to the GD -36 of 4 shortcut keys (MENU,
BACK, PLAY / PAUSE, STOP), all in the front panel.
IMPORTANT:
The PLAY/PAUSE shortcut key affects only the music playback function, while the STOP button affects to all playback functions.
In the case of supervised messages, pressing the STOP button during the playing time, the system will require cancellation
confirmation before stopping it, by the introduction of the supervisor password (Level 2). After entering it, the supervised message
will be canceled immediately, without waiting to reach the end.
For more details please go to 6.2. Supervised Messages.
GD-36
MAIN MENU
Message List
>
Music List
>
Program List
>
Language
>
Adjustments
>
Service menu
>
28
8
610.396A
rev.
1