6.4.1.1. Local Network Setup (IP Mode).
When the GD-36 is connected to a router (Gateway), the default Local Network (IP) must be AUTO. This configuration is based on
the allocation of network address automatically, following the standard protocol DHCP, each time a new item you want to connect
to the network. This is the easy way configuration (valid for most installations) and does not need to consult with your local
network administrator. Always can be verified the linking parameters with the router by pressing "OK" on the "AutoIP Data" option
on IP Mode menu.
In complex systems, the network administrator can force to use a specific IP address, landline calls, for each of the teams that
want to connect to it. In this case, the GD-36 should be set in "MANUAL". You should also use the "manual" mode, when you want
GD-36 connect directly to a computer using a crossover cable or "CrossOver Type" (See Section 6.4.1 Ethernet Setup).
To activate the MANUAL mode, please follow the next steps:
1.
Press " " to select the IP Mode option.
2.
Press
"OK"
to enter in the IP Mode edit mode.
3.
The "[Auto]" will appear on the screen, indicating this option can be changed.
4.
Select "[Manual]", using the " " or " " keys, and press
"OK"
to fix it.
5.
Select "Configure" option and press
"OK".
6.
Then, the "Manual IP 1/2" menu will appear.
7.
Select the parameter to set using the " " or " ", and press "OK" to activate the
edit mode.
8.
Change data values using the " " or " " keys and move to the next parameter
using the " " o " " keys.
9.
Finally fix the desired values with the
"OK".
10.
Pressing " " or " " keys in the most extreme positions forward or back one
page.
11.
When all parameters have been set properly, press
BACK
to come back to the
IP Mode menu. Sometimes is required to reboot the device (GD-36) and the router
in order that changes will take effect.
GD-36
28
15
610.396A
rev.
1